Contacts

SAER – Submersible pumps (series 10)

Request a quote

SAER 10″ submersible pumps are borehole electric pumps for wells with a nominal diameter of 10″. Flow up to 400 m³/h, head up to 955 m, power up to 185 kW at 50 Hz.

The series includes three lines: radial NR250 and semi-axial S252-253 and VS10. The design of SAER borehole units and the materials used are described on the brand page: SAER.

What are the specifications of SAER 10″ pumps?

Line Impellers Flow rate, m³/h Head, m Power, kW Materials
NR250 radial up to 210 up to 955 up to 185 cast iron, stainless steel
S252-253 semi-axial up to 400 up to 388 up to 170 cast iron, stainless steel, bronze, Super Duplex
VS10 semi-axial up to 355 up to 316 up to 185 cast iron, stainless steel, Super Duplex

Data is given for 50 Hz.

How do the SAER 10″ lines differ?

NR250 is designed for the highest head among SAER borehole pumps, up to 955 m. It has an integrated check valve and a steel outer jacket. The line is used to feed autoclaves and storage tanks, in washing systems, for irrigation and underground extraction.

S252-253 delivers the highest flow in the series, up to 400 m³/h. Depending on the size, the pump can be coupled with 8″, 10″ or 12″ motors. Its wear parts and investment-cast components are designed for harsh conditions, and the Super Duplex version for marine environments.

VS10 is the high-efficiency line for pumping stations, the marine sector, offshore, mining and irrigation. The Super Duplex version is intended for brackish water and sea water.

Which versions and accessories are available?

  • horizontal installation on request;
  • PE+PA wound motor for variable frequency drive operation or hot water;
  • FPM seals for stainless steel versions (S252-253, VS10);
  • cooling jacket, cables, control panels, PT100 sensors.

Where are SAER 10″ submersible pumps used?

Deep water intakes for municipal systems and industrial sites, pumping stations, irrigation systems, dewatering in mines and quarries, the marine sector, and auxiliary systems on offshore platforms.

How to select a SAER 10″ pump?

We need the flow and head at the duty point, the dynamic level, casing inner diameter, water composition and temperature, and the motor starting method. For heads above 390 m we consider NR250; for flows above 210 m³/h, S252-253 or VS10.

Steiner Ukraine selects the line, number of stages and motor, supplies the pump and spare parts and carries out installation and service. Other borehole series are listed under submersible pumps.

Frequently asked questions

Which SAER borehole pump delivers the highest head?

NR250 in the 10″ series, up to 955 m at 50 Hz with flows up to 210 m³/h.

Which motors can be used with S252-253?

Depending on the size, with 8″, 10″ or 12″ motors.

Are there SAER 10″ pumps for sea water?

Yes: S252-253 in bronze or Super Duplex, and VS10 in Super Duplex.

Manufacturer: SAER, Italy

Category: Submersible pumps

Industries: water supply, irrigation, industry, mining, offshore

Type: 10″ borehole pump, three lines