SAER 4″ submersible pumps are borehole electric pumps for wells with a nominal diameter of 4″. Flow up to 25 m³/h, head up to 390 m, power up to 7.5 kW at 50 Hz.
The series includes two lines: radial NS95/NS96 and FS98 with floating impellers. The design of SAER borehole units and the materials used are described on the brand page: SAER.
What are the specifications of SAER 4″ pumps?
| Parameter |
NS95/NS96 |
FS98 |
| Impeller type |
radial |
floating |
| Max. flow, 50 Hz |
25 m³/h |
12 m³/h |
| Max. head, 50 Hz |
355 m |
390 m |
| Max. power |
7.5 kW |
7.5 kW |
| 60 Hz version |
up to 30 m³/h, up to 521 m |
up to 14.5 m³/h, up to 396 m |
| Materials |
cast iron, stainless steel |
cast iron, stainless steel |
| Sand in water |
— |
up to 300 g/m³ |
How do NS96 and FS98 differ?
NS96 replaces the earlier NS95 line. The hydraulics were updated for higher efficiency while keeping a compact size. NS96 delivers up to 25 m³/h against 12 m³/h for FS98, so it is chosen for clean water and larger flows.
FS98 has floating impellers that pass sand at concentrations up to 300 g/m³. The line suits boreholes with sand ingress. A check valve is integrated into the FS98 delivery fitting.
Both lines use glass-fibre-reinforced polycarbonate for higher abrasion resistance. The NS96 design simplifies removal, maintenance and reassembly.
Which versions and accessories are available?
- horizontal installation for both lines;
- cooling jacket for installation in an open tank;
- cables and control panels;
- PT100 temperature sensors.
Where are SAER 4″ submersible pumps used?
Lifting water from boreholes for private and municipal systems, pressure boosting and water distribution, agricultural irrigation, and process water supply for industrial sites.
How to select a SAER 4″ pump?
We need the flow and head at the duty point, the dynamic water level, installation depth, casing inner diameter, sand content and power supply data. If sand is always present, we consider FS98.
Steiner Ukraine selects the model and motor, supplies the pump and spare parts and carries out installation and service. Other borehole series are listed under submersible pumps.
Frequently asked questions
Which SAER 4″ pump suits a sandy borehole?
FS98. Its floating impellers pass sand at concentrations up to 300 g/m³.
Can a SAER 4″ pump be installed horizontally?
Yes, the manufacturer allows horizontal installation for NS95/NS96 and FS98.
How does NS96 differ from NS95?
NS96 is the new line replacing NS95. It has updated hydraulics with higher efficiency in the same compact size.