The SAER SM252 ballast pump is a submersible pump with bottom water intake. The motor is located above the pump inside the jacket. Flow up to 270 m³/h, head up to 48 m, power up to 45 kW at 50 Hz.
General information on SAER submersible units and materials is on the brand page: SAER.
What are the specifications of the SAER SM252?
| Parameter |
Value |
| Design |
bottom intake, motor above the pump inside the jacket |
| Max. flow, 50 Hz |
270 m³/h |
| Max. head, 50 Hz |
48 m |
| Max. power |
45 kW |
| Materials |
cast iron, stainless steel, Super Duplex |
How does a ballast pump differ from a borehole pump?
In a borehole unit the motor sits below the pump and water enters through a screen between them. In the SM252 the inlet is at the bottom and the motor sits above the pump inside the jacket. This layout allows water to be drawn from the lower part of a tank.
The SM252 is available in cast iron, stainless steel and Super Duplex. We choose the material based on the water composition.
Where is the SAER SM252 ballast pump used?
The manufacturer designs the SM252 for ballast systems. Fields of use include offshore platforms, industry, mining and municipal systems where water must be drawn from the bottom of a tank.
How to select a SAER ballast pump?
We need the flow and head at the duty point, the water type (fresh or sea water), the minimum level in the tank, the installation method and the supply data. The material is defined by the water composition.
The minimum water level in the tank determines the installation height of the pump. The installation method defines the mounting, cable length and position of the control panel.
Steiner Ukraine selects the model and motor, supplies the pump and spare parts and carries out installation and service. Other series are listed under submersible pumps.
Frequently asked questions
What is the SAER BALLAST pump for?
For ballast systems and drawing water from the bottom of tanks. The pump has a bottom inlet, with the motor above it inside the jacket.
What materials is the SAER SM252 made of?
Cast iron, stainless steel and Super Duplex. We define the material from a water analysis.
What flow does the SAER SM252 deliver?
Up to 270 m³/h at heads up to 48 m, 50 Hz.