Contacts

SAER – Submersible pumps (series 8)

Request a quote

SAER 8″ submersible pumps are borehole electric pumps for wells with a nominal diameter of 8″. Flow up to 228 m³/h, head up to 782 m, power up to 110 kW at 50 Hz.

The series includes three lines: radial NR201 and semi-axial S181 and VS8. The design of SAER borehole units and the materials used are described on the brand page: SAER.

What are the specifications of SAER 8″ pumps?

Line Impellers Flow rate, m³/h Head, m Power, kW Materials
NR201 radial up to 120 up to 782 up to 92 cast iron, stainless steel
S181 semi-axial up to 228 up to 338 up to 92 cast iron, stainless steel, bronze, Super Duplex
VS8 semi-axial up to 200 up to 294 up to 110 cast iron, stainless steel, Super Duplex

Data is given for 50 Hz.

How do the SAER 8″ lines differ?

NR201 is a radial pump for high heads, up to 782 m. The outer jacket is stainless steel, and a check valve is integrated into the delivery fitting. The line is used to feed autoclaves and storage tanks, for washing systems, irrigation and underground extraction.

S181 delivers the highest flow in the series, up to 228 m³/h. The material can be chosen separately for the casing and for each component. Investment-cast parts make maintenance easier.

VS8 is the high-efficiency line with motors up to 110 kW. The manufacturer designs it for harsh mining and offshore conditions. Impellers and diffusers are investment-cast, with an integrated check valve.

Which versions and accessories are available?

  • horizontal installation on request;
  • PE+PA wound motor for variable frequency drive operation or hot water;
  • FPM seals for stainless steel versions (S181, VS8);
  • cooling jacket, cables, control panels, PT100 sensors.

Where are SAER 8″ submersible pumps used?

Water intakes for municipal systems and industrial sites, large-area irrigation, dewatering in quarries and mines, washing systems, and auxiliary systems on offshore platforms.

How to select a SAER 8″ pump?

We need the flow and head at the duty point, the dynamic level, casing inner diameter, water composition and temperature, and the motor starting method. For heads above 340 m we consider NR201; for flows above 120 m³/h, S181 or VS8.

Steiner Ukraine selects the line, number of stages and motor, supplies the pump and spare parts and carries out installation and service. Other borehole series are listed under submersible pumps.

Frequently asked questions

Which SAER 8″ pump suits a deep borehole?

NR201. Its radial impellers provide up to 782 m head at flows up to 120 m³/h.

What is the maximum motor power in the SAER 8″ series?

110 kW in the VS8 line. NR201 and S181 are fitted with motors up to 92 kW.

Are there SAER 8″ pumps for sea water?

Yes: S181 in bronze or Super Duplex, and VS8 in Super Duplex.

Manufacturer: SAER, Italy

Category: Submersible pumps

Industries: water supply, irrigation, industry, mining, offshore

Type: 8″ borehole pump, three lines