Contacts

SAER – Submersible pumps (series 6)

Request a quote

SAER 6″ submersible pumps are borehole electric pumps for wells with a nominal diameter of 6″. Flow up to 90 m³/h, head up to 540 m, power up to 37 kW at 50 Hz.

The series includes four lines: radial NR151-152 and VR140, and semi-axial S151-152 and VS6. The design of SAER borehole units and the materials used are described on the brand page: SAER.

What are the specifications of SAER 6″ pumps?

Line Impellers Flow rate, m³/h Head, m Power, kW Materials
NR151-152 radial up to 64 up to 540 up to 37 cast iron, stainless steel
VR140 radial up to 21 up to 299 up to 15 AISI 304 stainless steel
S151-152 semi-axial up to 90 up to 390 up to 37 cast iron, stainless steel, bronze
VS6 semi-axial up to 90 up to 308 up to 37 cast iron, stainless steel, Super Duplex

Data is given for 50 Hz.

How do the SAER 6″ lines differ?

NR151-152 is designed for the highest head in the series, up to 540 m. The radial impellers are highly wear-resistant, and a check valve is integrated into the delivery fitting.

VR140 is made of investment-cast AISI 304 stainless steel. Maximum operating pressure is 30 bar. The pump can be coupled with 4″–6″ oil-filled or 6″ water-filled motors.

S151-152 delivers up to 90 m³/h at up to 390 m head. Impellers and diffusers are investment-cast. The line is available in cast iron, stainless steel and bronze, which allows operation with sea water.

VS6 is the high-efficiency line. It has an integrated check valve and a Super Duplex version for aggressive media.

Which versions and accessories are available?

  • horizontal installation — standard for NR151-152, on request for the other lines;
  • PE+PA wound motor for variable frequency drive operation or hot water;
  • FPM seals for stainless steel versions;
  • cooling jacket, cables, control panels, PT100 sensors.

Where are SAER 6″ submersible pumps used?

Water supply for communities and industrial sites, pressure boosting and distribution, irrigation, washing systems, mine dewatering, and auxiliary systems on offshore platforms.

How to select a SAER 6″ pump?

The key parameters are the flow and head at the duty point, the dynamic level, the casing inner diameter, and the water composition and temperature. For high head at moderate flow we consider NR151-152; for higher flow, S151-152 or VS6.

Steiner Ukraine selects the line, number of stages and motor, supplies the pump and spare parts and carries out installation and service. Other borehole series are listed under submersible pumps.

Frequently asked questions

Which SAER 6″ pump delivers the highest head?

NR151-152, up to 540 m at 50 Hz.

Which SAER 6″ pump suits sea water?

S151-152 in bronze or VS6 in Super Duplex. We choose the material based on water composition.

Can a SAER 6″ pump run on a 4-inch motor?

For VR140, yes: the manufacturer allows 4″–6″ oil-filled and 6″ water-filled motors.

Manufacturer: SAER, Italy

Category: Submersible pumps

Industries: water supply, irrigation, industry, mining, offshore

Type: 6″ borehole pump, four lines