The Verderair VA air-operated diaphragm pump transfers aggressive and abrasive liquids. The series has metallic and non-metallic versions with flow up to 1200 l/min and discharge pressure up to 8.6 bar. The brand overview is on the Verderair brand page.
What is the Verderair VA pump used for?
VA pumps are used for paints and coatings, solvents, chemicals, waste water, oil transfer and filter press feeding.
According to the manufacturer, the fast-acting air valve uses the air to move the liquid instead of exhausting it, so less air is needed for the same flow. The chambers are bolted, which simplifies maintenance.
What are the specifications of the VA series?
| Model |
Version |
Max. flow, l/min |
Max. pressure, bar |
Dry suction lift, m |
| VA08 |
non-metallic |
19 |
7,0 |
2,5 |
| VA10 |
non-metallic |
25 |
7,0 |
3,7 |
| VA15 |
non-metallic |
57 |
7,0 |
4,5 |
| VA20 |
metallic |
61 |
7,0 |
4,5 |
| VA25 (HE) |
metallic / non-metallic |
189 |
8,6 |
4,9 |
| VA40 |
metallic / non-metallic |
443 |
8,4 |
2,5 |
| VA40 (HE) |
non-metallic |
462 |
8,6 |
4,9 |
| VA50 |
metallic / non-metallic |
568 |
8,4 |
2,5 |
| VA50 (HE) |
non-metallic |
757 |
8,6 |
4,9 |
| VA80 (HE) |
non-metallic |
1059 |
7,0 |
4,9 |
| VA80 (HE) |
metallic |
1200 |
8,6 |
4,9 |
Metallic versions are made of aluminium, cast iron and 316 stainless steel, non-metallic versions of polypropylene, conductive polypropylene, PVDF and acetal. An ATEX version is available for most models. HE models come with anti-icing mufflers as standard.
How to select a Verderair VA pump?
- You provide the input data: the liquid, its viscosity, temperature and solids content, the required flow and pressure, explosion protection requirements.
- Steiner Ukraine selects the size and the housing, diaphragm and valve materials together with the manufacturer.
- You receive a commercial offer. The price depends on the model and configuration.
For aggressive chemicals without metal parts, use the series Verderair PURE. Pump selection for aggressive media is covered in the article “How to select a pump for aggressive and chemically active liquids”.
Frequently asked questions
What is the maximum flow of VA?
Up to 1200 l/min in the metallic VA80 (HE) model.
What pressure does VA deliver?
Up to 8.6 bar depending on the model.
What materials is VA made of?
Metallic versions are made of aluminium, cast iron or 316 stainless steel, non-metallic versions of polypropylene, PVDF or acetal.
Is there an ATEX version available?
Yes, for most models of the series.
How much does VA cost?
The price is provided on request. It depends on the model and configuration.