The Verderair e-PURE diaphragm pump combines a solid PTFE or UHMW PE housing with an electric drive and runs without compressed air. The series has three models with flow up to 100 l/min and pressure up to 5 bar. The brand overview is on the Verderair brand page.
What is the Verderair e-PURE pump used for?
e-PURE is designed for ultra-pure and aggressive chemicals where compressed air is not available or not desirable.
The liquid follows a horizontal flow path, which according to the manufacturer reduces friction losses. The manufacturer states low pulsation, low noise and lower energy consumption than air-operated pumps.
What are the specifications of the e-PURE series?
| Model |
Max. flow, l/min |
Max. pressure, bar |
Max. solids size, mm |
Wet / dry suction lift, m |
| VA-EP30 |
30 |
5 |
2 |
8,5 / 1,6 |
| VA-EP50 |
50 |
5 |
2 |
9 / 2,2 |
| VA-EP100 |
100 |
5 |
4 |
9 / 5 |
The housing is solid PTFE or UHMW PE. Other wetted parts are PEEK and 316L stainless steel, Hastelloy C or duplex steel. For the PE version, the maximum temperature is 70 °C. The pump is ATEX certified.
How to select a Verderair e-PURE pump?
- You provide the input data: the liquid and its concentration, temperature, the required flow and pressure, power supply parameters.
- Steiner Ukraine selects the model and materials together with the manufacturer.
- You receive a commercial offer. The price depends on the model and configuration.
For the air-operated version, see Verderair PURE. Pump selection for aggressive media is covered in the article “How to select a pump for aggressive and chemically active liquids”.
Frequently asked questions
Does e-PURE need compressed air?
No. The pump has an electric drive.
What flow does e-PURE deliver?
Up to 100 l/min in the VA-EP100 model.
What materials is the pump made of?
The housing is PTFE or UHMW PE, other wetted parts are PEEK, 316L stainless steel, Hastelloy C or duplex steel.
Is it ATEX certified?
Yes, according to the manufacturer.
How much does e-PURE cost?
The price is provided on request. It depends on the model and configuration.