The Verderair HP air-operated diaphragm pump delivers a discharge pressure of up to 17.2 bar and is intended primarily for filter press feeding. Flow is up to 189 l/min. The brand overview is on the Verderair brand page.
What is the Verderair HP pump used for?
According to the manufacturer, the higher the feed pressure, the drier and lighter the filter cake. While the filter press fills, the pump regulates itself and does not build excess pressure.
The pump is self-priming, can run dry and starts easily.
What are the specifications of the Verderair HP pump?
| Parameter |
Value |
| Model |
VA25 HP |
| Max. flow |
189 l/min |
| Max. discharge pressure |
17.2 bar |
| Dry suction lift |
4.9 m |
| Fluid connection |
1″ BSP/NPT |
| Air connection |
1/2″ NPT |
| Certificate |
ATEX |
According to the manufacturer, the other design features of HP are the same as in the VA series.
How to select a Verderair HP pump?
- You provide the input data: the slurry, solids content, filter press type and volume, the required pressure.
- Steiner Ukraine checks with the manufacturer whether HP suits your filter press and selects the materials.
- You receive a commercial offer. The price depends on the configuration.
For pumps with pressure up to 8.6 bar and flow up to 1200 l/min, see Verderair VA. The use of diaphragm pumps is described in the article “Diaphragm pumps: industrial applications and Steiner expertise”.
Frequently asked questions
What pressure does HP deliver?
Up to 17.2 bar.
What is HP used for?
Primarily for filter press feeding.
Can HP run dry?
Yes, according to the manufacturer.
What flow does HP deliver?
Up to 189 l/min.
How much does HP cost?
The price is provided on request. It depends on the configuration.