Contacts

Sundyne – Multistage Chemical Pump (Integrally Geared)

Request a quote

The Sundyne Integrally Geared HMP multistage pump is a horizontal centrifugal pump in which several overhung stages are driven by one gearbox and one motor. The series is designed for head up to 4,420 m at flows up to 410 m³/h.

HMP pumps have been produced since 1967. The design follows API 610 / ISO 13709 recommendations for integrally geared pumps. How the gearbox works is described on the page Sundyne.

Which Sundyne Integrally Geared multistage pump to choose: HMP 3000, 5000, 7000

Model Flow up to, m³/h Head up to, m Motor up to, kW Suction pressure up to, bar Case working pressure up to, bar
HMP 3000 100 3 050 600 30 260
HMP 5000 150 4 420 1 865 70 414
HMP 7000 410 4 420 3 000 70 414

Liquid temperature for all models is from −130 to +260 °C. The HMP 7000 is built with two, three or four stages.

How the Sundyne Integrally Geared multistage pump runs from one gearbox

All stages are driven by one gearbox, so the unit is more compact than multistage between-bearing pumps. According to the manufacturer, HMP pumps take up about a quarter of the space of such a pump.

The hydraulics are designed so that the rated point coincides with the best efficiency point. This reduces end-of-curve power, so a smaller motor can be used.

If the available NPSH is limited, an inducer is fitted at the first-stage inlet. The Barske impeller further reduces the required NPSH.

Where the Sundyne Integrally Geared multistage pump is used

  • mineral fertiliser and urea production;
  • purified terephthalic acid (PTA) production;
  • propylene feed where a single-stage LMV does not give enough head;
  • high-pressure water injection.

Seals and construction

  • mechanical seal: single, double, tandem;
  • horizontal mounting;
  • liquid viscosity up to 700 cP, solids up to 400 µm;
  • RF or RTJ flanges: HMP 3000 up to 1500#, HMP 5000 up to 2500#, HMP 7000 1500#;
  • ATEX certification.

Sundyne also supplies HMP as part of skid-mounted modular pump packages.

For head up to 1,921 m, use the single-stage Sundyne Integrally Geared. How to assess the cost of a pump over its whole service life — see the article “Equipment LCA: why a cheap pump ends up costing more than a premium one”.

Steiner Ukraine selects the Sundyne Integrally Geared multistage pump for the process conditions and provides installation, commissioning and service.

Frequently asked questions

How many stages does an HMP pump have?

For the HMP 7000 the manufacturer specifies two, three or four stages on one gearbox. The configuration of the HMP 3000 and HMP 5000 is confirmed for the specific process conditions.

What is the maximum head?

Up to 4,420 m on the HMP 5000 and HMP 7000.

Which processes are HMP pumps intended for?

Fertiliser, urea and PTA production, propylene feed, water injection.

How does HMP differ from LMV?

LMV is a single-stage pump with head up to 1,921 m. HMP has several stages and head up to 4,420 m.

Manufacturer: Sundyne

Category: Chemical pumps, Multistage pumps

Industries: Other

Model range: 3 positions