Masdaf EnduroLite — submersible drainage pumps
Masdaf EnduroLite — series single-phase submersible drainage pumps for domestic and light-duty use industrial applications. The series The range includes nine models with power outputs ranging from 0.33 to 1.35 kW with a discharge connection 1″–2″ and a rotational speed of 3,000 rpm. The EnduroLite drainage pump is supplied with a 10-metre cable and a float switch; available on certain models control cabinet option.
What is the EnduroLite range designed for?
The series designed for water and wastewater from limited solid particle content at a temperature of 0–30 °C. Three impeller designs — open, closed and cutting — range from pure rainwater into domestic wastewater from fibrous inclusions. The clearance depends on the model and is 3, 6 or 20 mm; models the inclusions are crushed using a cutting wheel instead of to let them through.
Which models are part of the EnduroLite range?
| The model | Impeller | Body | Wheel material | Shaft | Clearance, mm |
|---|---|---|---|---|---|
| EnduroLite 50 | open | technopolymer | Noryl | AISI 304 | 3 |
| EnduroLite 100 | open | technopolymer | Noryl | AISI 304 | 3 |
| EnduroLite 150 | open | technopolymer | Noryl | AISI 304 | 3 |
| EnduroLite 150F | open | technopolymer | AISI 304 | AISI 304 | 20 |
| EnduroLite 150S | closed | AISI 304 | AISI 304 | AISI 304 | 6 |
| EnduroLite 200S | open | AISI 304 | AISI 304 | AISI 304 | 6 |
| EnduroLite 150PB | cutting | AISI 304 | cast iron GG 25 | AISI 304 | — |
| EnduroLite 180PB | cutting | AISI 304 | GG 25 cast iron | AISI 304 | — |
| EnduroLite 190PB | cutting | AISI 304 | GG 25 cast iron | AISI 304 | — |
Mechanical seal in all models — carbide silicon / silicon carbide.
EnduroLite technical specifications
| The model | Power, kW | Pressure pipe | Mass, kg | Dimensions, mm |
|---|---|---|---|---|
| EnduroLite 50 | 0,33 | 1″ | 5,2 | Ø 147 × 248 |
| EnduroLite 100 | 0,65 | 1¼” | 12 | Ø 180 × 326 |
| EnduroLite 150 | 1,0 | 1¼” | 13 | Ø 180 × 326 |
| EnduroLite 150F | 1,1 | 2″ | 14 | 185 × 195 × 400 |
| EnduroLite 150S | 1,1 | 1½” | 17 | 185 × 260 × 350 |
| EnduroLite 200S | 1,35 | 2″ | 23 | 200 × 280 × 430 |
| EnduroLite 150PB | 1,1 | 2″ | 23,5 | 200 × 280 × 430 |
| EnduroLite 180PB | 1,35 | 2″ | 23,5 | 200 × 280 × 430 |
| EnduroLite 190PB | 1,35 | 2″ | 25 | 200 × 280 × 430 |
| General parameter series | Value |
|---|---|
| Capacity | 1–20 m³/h according to the series page; according to catalogue curves — up to ≈ 26 m³/h |
| Pressure | 3–18 m according to the data pages in the series; according to the catalogue entries — up to ≈ 19 m |
| Rotational speed | 3000 rpm |
| Pressure pipe | 1″ – 2″ |
| Fluid temperature | 0 – 30 °C |
| Power supply | single-phase |
| Cable | 10 m, with a float switch |
| Mechanical seal | silicon carbide / silicon carbide |
| Certification | CE; submersible pumps, certified to the TSE standard |
Class protection, winding insulation class and supply voltage We will confirm the details for a specific order based on the manufacturer’s certificate.
What is the water pressure provided by each EnduroLite model?
Maximum head based on the catalogue curves (at zero (flow rate): EnduroLite 50 — approximately 9 m, 100 — about 11 m, 150 — about 14 m, 150F — approximately 9.5 m, 150S — approximately 18 m, 200S — approximately 19. The operating point is selected based on the curve a specific model, rather than the highest-spec version: u pressure and flow in the working zone are distributed along a curve, and for 150F greater clear passage is paid at a lower pressure.
How to choose the right EnduroLite model for the job
Selection sequence It’s simple. First, you determine the nature of liquids: clean water or rainwater — models 50, 100, 150 with a free passage of 3 mm; effluent containing particles up to 20 mm — 150F; drains requiring resistance to corrosion of the casing made of stainless steel — 150S and 200S; domestic effluent containing fibrous matter features — PB models with a cutting edge wheel. Next, adjust the feed rate as required and The pressure is selected the sample size within the selected group, and later on check that the pressure is correct a branch pipe from the existing pipeline.
How does EnduroLite differ from the Masdaf ENDURO series?
EnduroLite — a lightweight single-phase range for homes, plots and light industry: nine models, power up to 1.35 kW, head up to ≈ 19 m. Series ENDURO is now industrial equipment of a different class with a significantly higher flow rate and pressure and flanged connections. If the task is to— pump out the pit, basement, lift shaft or decorative rates, choose EnduroLite; when it comes to sewage pumping station or industrial-scale — ENDURO.
Where are EnduroLite pumps used?
- drainage and discharge rainwater;
- pumping water out of basements and lift shafts;
- drainage sewage and greywater;
- ornamental ponds, waterfalls, pumping rainwater;
- Wastewater from light industry.
Selection, supply and service from Steiner Ukraine
Steiner Ukraine supplies Masdaf equipment in Ukraine from selection based on the actual conditions at the site. To calculate It is sufficient to specify the nature of the liquid, the required elevation, the geodetic height head, length and diameter of the pressure pipe lines, as well as the conditions of the pit. Based on these Using this data, we determine the EnduroLite model, We confirm the operating point on the curve manufacturer and provide the specification, including delivery dates. Spare parts — seals, working parts wheels, cable glands — are ordered by passport entry pump.
