The Samzon Pallet Inverter is a stationary machine that clamps the load between two platforms and rotates it by 90° or 180°. This is how a pallet is replaced, spacers between layers are removed or damaged goods are reached from below without manual restacking.
FL and DC machines have manual push-button control or a semi-automatic cycle. The operating principle and a comparison with other machines are on the brand page: Samzon.
What are the specifications of FL and DC pallet inverters?
| Model |
Max. load height |
Capacity |
Loading |
| FL2000-15 |
2000 mm |
1500 kg |
pallet jack or electric stacker, ramp |
| FL2500-15 |
2500 mm |
1500 kg |
pallet jack or electric stacker, ramp |
| FL3000-15 |
3000 mm |
1500 kg |
pallet jack or electric stacker, ramp |
| DC2000-15 |
2000 mm |
1500 kg, 2000 kg option |
forklift or stacker |
| DC2500-15 |
2500 mm |
1500 kg, 2000 kg option |
forklift or stacker |
| DC3000-15 |
3000 mm |
1500 kg |
forklift or stacker |
| DCINOX2000-15 |
2000 mm |
1500 kg |
stainless steel 304L, hydraulics |
How do the FL and DC series differ?
In the FL series the platform comes down to floor level, and the load is driven in with a pallet jack or electric stacker over a low ramp. No forklift is needed. FL2000-15 and FL2500-15 have a 1200×1000 mm platform, a 500 mm minimum load height and perform 20–25 exchanges per hour.
In the DC series both platforms move, and the load is placed with a forklift or stacker. DC2000-15 and DC2500-15 have a 1200×1200 mm platform, a 400 mm minimum load height and perform up to 30 exchanges per hour. A floor-level version with a ramp is available as an option.
How does a stationary pallet inverter work?
To exchange a pallet, the new pallet is placed on top of the load, the platforms clamp it and the machine turns by 180°. The load now stands on the new pallet. To remove spacers, the machine stops at 90° and eases the platform pressure.
The semi-automatic version has a PLC, an HMI touch panel and a single start button. Safety light barriers and a fence are installed for the automatic cycle. Power supply is 400 V, three-phase.
What is the stainless pallet inverter for?
The DCINOX2000-15 is made entirely of 304L stainless steel, with a washable design and hydraulic drive. It moves loads from wooden to plastic pallets at the entrance to hygienic areas in food, frozen and pharmaceutical production.
How to select a stationary pallet inverter?
We need the load type, its weight and height, pallet size, the loading method and the number of exchanges per shift. If the product must not be turned over, the right choice is a pallet changer.
If pallets are changed in several places in a plant or warehouse, we consider a mobile pallet inverter.
Steiner Ukraine selects the model and options, supplies the equipment and spare parts and carries out installation and service.
Frequently asked questions
What load weight does the Samzon pallet inverter handle?
Up to 1500 kg. A 2000 kg option is available for DC2000-15 and DC2500-15.
Is a forklift needed for the FL series?
No. The platform comes down to the floor, and the load is driven in with a pallet jack or electric stacker.
How many pallet exchanges per hour does the machine perform?
FL2000-15 and FL2500-15: 20–25; DC2000-15 and DC2500-15: up to 30.