Contacts

SAER – End suction pumps (NCA)

Request a quote

The SAER NCA is an end-suction pump for waste water and liquids containing solids, installed in a dry room. Flow up to 2400 m³/h, head up to 70 m, power up to 200 kW at 50 Hz.

General information on the manufacturer and materials is on the brand page: SAER.

What are the specifications of the SAER NCA?

Parameter Value
Type end suction, dry installation
Max. flow, 50 Hz 2400 m³/h
Max. head, 50 Hz 70m
Max. power 200 kW
Impeller open or closed
Materials cast iron, ductile iron, stainless steel, Super Duplex

How is the SAER NCA built?

The discharge is on the central axis of the casing, so the load on the feet is evenly distributed. Rigid feet reduce vibration.

A special volute shape reduces radial loads. The hydraulics combine efficiency with a large free passage for solids.

Open or closed impeller: which to choose?

The NCA is supplied with an open or closed impeller. The choice depends on the liquid: the amount and size of solids, the presence of fibres and the efficiency requirement. We define the impeller during selection from the media data.

Where are SAER NCA pumps used?

Sewage lifting stations, rainwater and groundwater drainage, slurry transfer in agriculture and process sludge in industry, treatment plants, liquids containing solids, and clean water with small amounts of particles.

How to select a SAER NCA pump?

We need the flow and head at the duty point, the effluent composition, solids size and content, temperature, inlet conditions and supply data. For submerged installation we consider the series SAER SD.

Steiner Ukraine selects the size, impeller and material, supplies the pump and spare parts and carries out installation and service. Other series are listed under end-suction pumps.

Frequently asked questions

What does dry installation mean?

The pump stands in a dry room outside the effluent tank, and the liquid reaches it through a pipe.

What flow does the SAER NCA deliver?

Up to 2400 m³/h at heads up to 70 m, 50 Hz.

Does the NCA handle clean water?

Yes, the manufacturer allows clean water and water with small amounts of particles.

Manufacturer: SAER, Italy

Category: End suction pumps

Industries: sewerage, waste-water treatment, agriculture, industry, mining

Type: end-suction waste-water pump, dry installation