Sidel Palletiser

Sidel Palletiser is end-of-line equipment that places cases, corrugated boxes, shrink packs, plastic crates and bottles onto pallets. Sidel produces layer, robotic and cobotic palletisers, as well as depalletisers and pallet handling equipment. Steiner Ukraine is the official distributor of Sidel in Ukraine.

Sidel palletiser: which model to choose?

The model is selected by line speed, pack type and the floor space available for palletising.

The model	Type	Manufacturer data
CoboAccess_Pal	cobot palletiser	low-speed lines
RoboAccess_Pal S	compact robotic, combining robotics and cobotics	up to 12 cycles/min, payload up to 25 kg, pallet height 1700 mm, less than 12 m² for two stations
RoboAccess	robotic cell	corrugated cases with glued or taped flaps, automatic changeovers
PalAccess	modular layer palletiser	small and unstable packs, fast format changeover
PalKombi	layer palletiser, low-level infeed	up to 5 layers/min with one pallet, up to 8 layers/min with two
PalPack 4000	layer palletiser	the layer is formed by 2, 4 or 6 robots depending on infeed speed
EvoFlex	high-speed single-column, low-level infeed	automatic changeover in less than 1 min
PalLinear	high-speed inline, high-level infeed	up to 660 layers/h
PalRoboKombi and PalVite	robotic island for crates, packs and loose bottles	450 cycles/h with 600 kg at the wrist to 550 cycles/h with 300 kg; up to 8 layers/min with two pallets
PalKombi Gripping	gripping palletiser for plastic crates	low and medium speeds, pallets up to 1250 mm

For low and medium speeds and limited floor space, choose CoboAccess_Pal, RoboAccess_Pal S or RoboAccess. For medium and high speeds, the layer palletisers PalKombi, PalPack 4000 and EvoFlex. PalLinear delivers the highest output. PalKombi Gripping and PalRoboKombi are designed for plastic beverage crates.

How does a Sidel palletiser form a layer?

For layer preparation, Sidel offers the modular AxoSmart and RoboSmart systems:

a dosing conveyor counts and separates the packs;
a flat-chain table conveys them at the right speed;
one or more gripper heads transfer and turn the packs;
the layer is assembled on the layer-forming table according to the selected pattern.

Format and pallet pattern changes are made in software, without mechanical adjustment. PalDesigner software is available for creating pallet patterns.

Sidel depalletisers

Sidel depalletises layer by layer, by column or robotically, with low-level or high-level infeed.

Sweepoff A and B — loose bottles and cans;
Depal Robokombi and Depal Vite 410 — robotic depalletisers for crates, packs and bottles;
DepalKombi Gripping — plastic crates;
DepalFlex — layer-by-layer pick-and-place depalletiser;
robotic keg palletising and depalletising.

Pallet handling equipment

With the palletiser, Sidel supplies chain and roller conveyors, transfer, rotation and distribution tables, shuttles, elevators and a pallet inspection system. The pallet transport layout is designed to fit the plant. After the palletiser, the pallet is stretch-wrapped; see pallet wrappers.

Where is the Sidel palletiser used?

At the end of beverage filling lines, in food production, and in home care and cosmetics production. The palletiser is linked to Sidel packaging equipment, which forms multipacks and corrugated cases. How warehouse and end-of-line automation addresses staff shortages is covered in the article “Logistics automation 2026: how Steiner Ukraine addresses the staff shortage”.

Selection and service from Steiner Ukraine

To select a Sidel palletiser, we clarify:

pack type and dimensions, weight and stability;
line speed in packs or layers per hour;
pallet dimensions, pallet height and pallet patterns;
floor area and ceiling height, product infeed level;
whether depalletising, wrapping and pallet conveying are needed.

Based on this data, we determine the model, infeed layout and scope of supply. This is followed by supply, installation, service and spare parts. Steiner Ukraine has been operating in the industrial equipment market since 2006.