Contacts

WALDNER - Laboratory furniture

Request a quote

Waldner laboratory furniture is a modular system in which furniture, media supply and ventilation are designed together. The laboratory can be reconfigured for new processes without replacing all the equipment. Company information is given on the WALDNER brand page.

What does Waldner laboratory furniture consist of?

Component Purpose
Laboratory benches Work surfaces for different workstation layouts
Laboratory cabinets Storage of chemicals, instruments and documents
Laboratory sinks Chemical-resistant water supply and drainage units
Service modules and media ceilings Supply of electricity, gases, water and data to workstations
Supply and disposal systems Safe supply of reagents and removal of waste
Fume hoods Protection of personnel from hazardous substances
Explosion-proof version Work in hazardous (explosive) areas
Mobile solutions Mobile fume hoods and laboratories

For short delivery times WALDNER offers the XPRESS range of standard laboratory furniture components.

Which fume hoods are part of Waldner laboratory furniture?

The main fume hood range is Secuflow. A supporting airflow is supplied from aerodynamic profiles on the side walls and worktop edge, which stabilises the inflow.

  • Exhaust air volume is up to 33 % lower, down to 270 m³/h per metre of width.
  • Noise level is up to 10 dB(A) lower thanks to Venturi-based flow measurement.
  • Containment of hazardous substances exceeds the requirements of DIN EN 14175 and ASHRAE 110.
  • Width: 1200, 1500, 1800, 2100 or 2400 mm (300 mm grid).
  • For low rooms the connection height can be reduced to 2570 mm.

The Secuflow Vision model has glazed side and rear walls, an inclined front and electric height adjustment with up to four stored positions.

Which worktop and lining materials are available?

Fume hood worktops are made of melamine (post-forming), polypropylene, solid-grade laminate (including Trespa Toplab+), epoxy resin, stainless steel, stoneware composite or glass. For work with sulphuric acid, hydrochloric acid and aqua regia the interior is lined with stoneware.

Are there hoods for acids and high temperatures?

Yes. Special fume hoods to DIN EN 14175-7 are designed for high thermal loads and work with acids, including perchloric and hydrofluoric acid.

Which safety features can be added?

  • IONIC ionisation of the supporting airflow to discharge static from particles and aerosols;
  • automatic sash closing when the motion sensor detects no one at the hood;
  • a light barrier that stops the sash from closing when an obstacle is detected;
  • visual and audible alarm for an open sash;
  • remote monitoring via cameras and temperature sensors, with alarms passed to the building management system.

Which laboratories is Waldner laboratory furniture suitable for?

Pharmaceutical, biotechnology, chemical and food laboratories, cleanrooms, research centres and teaching laboratories.

Frequently asked questions

Can the laboratory layout be changed after installation?

Yes. Furniture and media supply are separated, so workstations can be rearranged and extended.

How much do Secuflow fume hoods reduce air consumption?

By up to 33 % compared with a conventional fume hood, down to 270 m³/h per metre of width.

Which standards do the fume hoods meet?

Containment in Secuflow hoods exceeds the requirements of DIN EN 14175 and ASHRAE 110. Special hoods are built to DIN EN 14175-7.

Which fume hood widths are available?

1200, 1500, 1800, 2100 and 2400 mm.

Are standard components with short delivery times available?

Yes, the XPRESS range.

Manufacturer: WALDNER

Industries: Other

Products of the manufacturer