Contacts

VerderFlex - Peristaltic pumps (VF)

Request a quote

The Verderflex VF hose pump transfers slurries, suspensions, high-solids liquids and viscous media. The series covers ten sizes — from VF10 to VF125 — with flows of up to 90 m³/h and operating pressures of up to 16 bar. The brand is described on the Verderflex brand page.

What is the Verderflex VF pump designed for?

The liquid passes only inside the hose, so the pump handles abrasive and corrosive media. The open hose passage lets large solids through: up to 31.25 mm in VF125. To clear a blockage, the pump can be run in reverse.

The pump is self-priming, with a suction lift of up to 9.5 m wc. It can run dry without damage.

What are the specifications of the Verderflex VF pump?

Parameter Value
Standard sizes VF10, VF15, VF25, VF32, VF40, VF50, VF65, VF80, VF100, VF125
Max. flow 90 m³/h (VF125)
Max. operating pressure 16 bar
Max. temperature 80 °C (VF125)
Max. solids size 31.25 mm (VF125)
Rotational speed up to 87 rpm depending on model
Motor power 0.12–37 kW

Standard voltage is 220/400 V for motors up to 7.5 kW and 400/690 V for motors from 9.2 kW, 50/60 Hz. An inverter is fitted when required.

Which hoses are available for the VF series?

  • NR — the most common hose for most industries;
  • NBR — for oily and fatty products;
  • EPDM — for corrosive chemicals;
  • CSM — for highly corrosive products;
  • NBRF — with a food-grade liner compliant with FDA CFR21 and EC No. 1935/2004.

According to the manufacturer, with DIN 11851, Tri-Clamp or RJT hygienic flanges the pump meets EHEDG requirements.

How to select a Verderflex VF pump?

  1. You provide the input data: the liquid, solids content and size, temperature, required flow and pressure.
  2. Steiner Ukraine and the manufacturer select the size, hose material and drive.
  3. You receive a quotation. The price depends on the size and configuration.

For lower flows, use the series Verderflex Dura. The operating principle of peristaltic pumps is explained in the article “Peristaltic pumps: operating principle, applications and selection criteria”.

Frequently asked questions

What is the maximum flow of the VF series?

Up to 90 m³/h in the VF125 size.

What is the operating pressure of the VF series?

Up to 16 bar.

Is VF suitable for slurries?

Yes. The manufacturer designs the series for slurries, suspensions and high-solids liquids.

Which hoses can be fitted in VF?

NR, NBR, EPDM, CSM and food-grade NBRF.

How much does a Verderflex VF pump cost?

The price is provided on request. It depends on the size and configuration.

Manufacturer: VerderFlex

Category: Peristaltic pumps

Industries: Food, Other

Model range: 10 positions