MF TECNO bulk material conveyors move the product from a silo or loading point to the packaging machine hopper. The range includes belt, screw, chain and paddle conveyors, bucket elevators, pneumatic conveying and sifters.
Some conveyors are developed by MIAL, part of the Massini Industries group. General information on the group is on the brand page: MF TECNO.
Which conveyor to choose for a bulk product?
| Equipment |
Purpose |
Manufacturer data |
| Tubular chain conveyor |
fragile and non-fragile products, closed circuit |
up to 60 m³/h, speed below 1 m/s |
| Sidewall belt conveyor |
granular products with medium and high flow |
linear, inclined, Z-type |
| Pendulum bucket elevator |
fragile granular products |
up to 30 m³/h |
| Bucket elevator |
vertical lifting to height, not for fragile products |
up to 400 m³/h |
| Chain conveyor (Redler) |
granules and pellets in large volumes |
up to 300 m³/h |
| Screw conveyors |
powders and low-flow products |
tubular up to Ø400 mm, open up to Ø500 mm |
| Paddle drag conveyor |
fragile products, horizontal or inclined |
from 15 m³/h, incline up to 45° |
| Pneumatic conveyor |
powders and granules over long distances without cross-contamination |
dense or dilute phase |
| Vibrating sifter |
separation by particle size and product cleaning |
one or more screens, dust extraction point |
How does a tubular chain conveyor work?
The product is moved by discs fixed to a chain inside a closed tube. The flow is even, and the product does not break up or create dust. One motor drives the whole system with horizontal, vertical and inclined sections.
Speed is adjusted by an inverter. The manufacturer compares energy use with screw and pneumatic conveyors and states a reduction of over 50%. The conveyor can have several loading and unloading points.
Which versions are available?
- structure or contact parts in AISI 304 or AISI 316;
- ATEX versions for explosive atmospheres: elevators, Redlers, screws, sifters, pneumatic conveyors;
- manual, pneumatic or motorised discharge gates;
- speed, anti-jamming and anti-slip sensors, inspection doors with micro-switches;
- control panel, support structures, loading hoppers.
How to choose conveyors for bulk products?
We need the product, its fragility and flowability, flow rate in m³/h, the route with length and lift height, the number of loading and unloading points, and hygiene and ATEX requirements. The conveyor feeds the weighing machine feeder or a big-bag filling station.
Steiner Ukraine selects the conveyor type and route, supplies the equipment and spare parts and carries out installation and service.
FAQ
Which conveyor suits a fragile product?
A tubular chain conveyor, a pendulum bucket elevator or a paddle drag conveyor.
What capacity do MF TECNO conveyors have?
Depending on type: tubular chain up to 60 m³/h, Redler up to 300 m³/h, bucket elevator up to 400 m³/h.
Are ATEX conveyors available?
Yes, for elevators, Redlers, screw conveyors, sifters and pneumatic conveyors.