{"id":16645,"date":"2024-09-13T14:08:24","date_gmt":"2024-09-13T11:08:24","guid":{"rendered":"http:\/\/localhost\/wordpress\/?post_type=product&p=16645"},"modified":"2026-10-14T17:31:12","modified_gmt":"2026-10-14T14:31:12","slug":"chemspin-twin-screw-pump-es","status":"publish","type":"product","link":"https:\/\/steiner.com.ua\/en\/catalog\/chemspin-twin-screw-pump-es\/","title":{"rendered":"CHEMSPIN ES twin screw pump"},"content":{"rendered":"

CHEMSPIN ES<\/strong> \u2014 a version of the industrial CHEMSPIN twin screw pump with extended casing and feed screws. It is designed for highly viscous media up to 1,000,000 mPa\u00b7s, including media that do not flow by gravity. Flow rate up to 70 m\u00b3\/h, differential pressure up to 25 bar.<\/p>\n

How does CHEMSPIN ES feed a product that does not flow?<\/h2>\n

The feed screws are extended towards the inlet. They draw the product from below the inlet port like a screw feeder and deliver it into the pumping chamber.<\/p>\n

In many cases no external feeder is needed. Product feed is gentle and solids are permitted.<\/p>\n

The pump performs three tasks: feeding, pumping and flushing. The manufacturer positions ES as an alternative to other pump technologies for viscous media.<\/p>\n

Technical data by size<\/h2>\n\n\n\n\n\n\n\n
Size<\/th>\nMax. flow rate, m\u00b3\/h<\/th>\nMax. differential pressure, bar<\/th>\nMax. solids size, mm<\/th>\n<\/tr>\n<\/thead>\n
CHEMSPIN 70 ES<\/td>\n10<\/td>\n20<\/td>\n20<\/td>\n<\/tr>\n
CHEMSPIN 90 ES<\/td>\n25<\/td>\n25<\/td>\n30<\/td>\n<\/tr>\n
CHEMSPIN 125 ES<\/td>\n70<\/td>\n25<\/td>\n45<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n\n\n\n\n\n\n\n\n\n
Parameter<\/th>\nValue<\/th>\n<\/tr>\n<\/thead>\n
Viscosity<\/td>\n0.5\u20131,000,000 mPa\u00b7s, higher on request<\/td>\n<\/tr>\n
Medium temperature<\/td>\n-10\u2026+180 \u00b0C, higher upon request<\/td>\n<\/tr>\n
Absorption<\/td>\nNPSHr from 0.5 m, suction lift up to 9 m<\/td>\n<\/tr>\n
Standard material<\/td>\nstainless steel 1.4404<\/td>\n<\/tr>\n
Installation<\/td>\nhorizontal, vertical, lateral; INLINE version<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

When to choose CHEMSPIN ES instead of the base CHEMSPIN?<\/h2>\n

When the medium does not enter the pump by gravity and a feeder would otherwise be needed upstream. For flowable media the base CHEMSPIN<\/a> with flow rates up to 300 m\u00b3\/h is sufficient.<\/p>\n

The manufacturer states a low cavitation risk for ES. Why this matters \u2014 see the article \u201cPump cavitation: symptoms, causes and how to eliminate it\u201d<\/a>.<\/p>\n

CHEMSPIN ES is also available in an explosion-proof version \u2014 see CHEMSPIN ATEX<\/a>. For hygienic products the same task is performed by HYGHSPIN Hopper<\/a>. Materials, elastomers, shaft seals and certificates are common to the whole range \u2014 see the Jung Process Systems page<\/a>.<\/p>\n

Selection and service from Steiner Ukraine<\/h2>\n

To select a CHEMSPIN ES, we clarify:<\/p>\n