{"id":1585599,"date":"2025-01-08T15:51:31","date_gmt":"2025-01-08T13:51:31","guid":{"rendered":"https:\/\/artem.steiner.com.ua\/?post_type=product&p=1585599"},"modified":"2026-10-15T15:33:34","modified_gmt":"2026-10-15T12:33:34","slug":"dellmeco-dme-plastic-series","status":"publish","type":"product","link":"https:\/\/steiner.com.ua\/en\/catalog\/dellmeco-dme-plastic-series\/","title":{"rendered":"Dellmeco DME Plastic Diaphragm Pump"},"content":{"rendered":"

Dellmeco DME Plastic Diaphragm Pump<\/strong> is an electro-mechanical double diaphragm pump with a housing made of conductive polyethylene (PE) or PTFE. It handles liquids, viscous products, media containing solids and fluidisable powders. The manufacturer is the Polish company Dellmeco, which has been producing diaphragm pumps since 2004. Steiner Ukraine is the official Dellmeco distributor in Ukraine.<\/p>\n

Dellmeco DME Plastic diaphragm pump: PE or PTFE?<\/h2>\n

The housing material is selected by chemical resistance to the product and by temperature.<\/p>\n\n\n\n\n\n\n
Body<\/th>\nProduct temperature<\/th>\nStandard sizes<\/th>\n<\/tr>\n<\/thead>\n
Conductive PE (code R)<\/td>\nup to 70 \u00b0C<\/td>\nDME 15, 25, 40, 50, 80<\/td>\n<\/tr>\n
Conductive PTFE (code Z)<\/td>\nup to 110 \u00b0C, briefly up to 120 \u00b0C<\/td>\nDME 15, 25, 40, 50<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Both materials are conductive: the housing is earthed and no static charge builds up. This is why DME Plastic is available in an ATEX version for flammable solvents and alcohols.<\/p>\n

How does the DME electro-mechanical diaphragm pump work?<\/h2>\n

An electric motor drives two diaphragms with a metal core through a crank mechanism. The diaphragm stroke is constant, so the flow remains stable when pressure and viscosity change. No compressed air or hydraulic fluid is needed. Discharge pressure is up to 6 bar.<\/p>\n

Dellmeco DME Plastic diaphragm pump: technical specifications<\/h2>\n

Flow rates are given at a 50 Hz mains frequency.<\/p>\n\n\n\n\n\n\n\n\n\n
The model<\/th>\nFlow, l\/min (m\u00b3\/h)<\/th>\nMotor, kW<\/th>\nConnections, suction \/ discharge<\/th>\nSolids, mm<\/th>\n<\/tr>\n<\/thead>\n
DME 15<\/td>\n44 (2,6)<\/td>\n0,75<\/td>\nG 1\/2\u2033 \/ G 1\/2\u2033<\/td>\nup to 4<\/td>\n<\/tr>\n
DME 25<\/td>\n65 (3,9)<\/td>\n1,5<\/td>\nG 1\u2033 \/ G 1\u2033<\/td>\nup to 7<\/td>\n<\/tr>\n
DME 40<\/td>\n183 (11,0)<\/td>\n2,2<\/td>\nG 1 1\/2\u2033 \/ G 1 1\/2\u2033<\/td>\nup to 10<\/td>\n<\/tr>\n
DME 50<\/td>\n400 (24,0)<\/td>\n5,5<\/td>\nG 2 1\/2\u2033 \/ G 2\u2033<\/td>\nup to 12<\/td>\n<\/tr>\n
DME 80<\/td>\n790 (47,4)<\/td>\n9,2<\/td>\nG 3\u2033 \/ G 3\u2033<\/td>\nup to 15<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Diaphragms: EPDM, NBR, TFM or TFM\/PFA. Ball valves: EPDM, NBR, PTFE, AISI 316 or polyurethane. Cylinder valves made of PE or PTFE are available for plastic pumps only. Dry suction lift is 3\u20134 m; wet suction lift is 8 m.<\/p>\n

Where is the Dellmeco DME Plastic diaphragm pump used?<\/h2>\n

The manufacturer lists the chemical and pharmaceutical industries, oil refining, power generation, water supply and wastewater treatment. The pump can run dry for long periods without damage and needs no priming before start-up. How to select materials for aggressive media is covered in the article \u201cHow to select a pump for aggressive and chemically active liquids\u201d<\/a>.<\/p>\n

For slurries and industrial media, there is DME Metal<\/a> made of aluminium, cast iron or AISI 316, and for food products, DME Hygienic<\/a>.<\/p>\n

Selection and service from Steiner Ukraine<\/h2>\n

To select a DME Plastic pump, we clarify:<\/p>\n